Boyd Cycles » Neck Rake Builders Kits

Neck Rake Builders Kits

Boyd Cycles now offers a weld-on replacement neck section for Bagger/ touring model FL frames. This piece provides correct frame geometry for installing a 23″, 26″, or 30″ wheel when installed with our FL raked triple trees. We provide this as a kit with our trees for the applications listed in the options below.

Stock tubes work with the 23″ kit. Extended length fork tubes are required for the 26″ and 30″ kit.

Builders Kit Features

• Mounting holes are present in our neck kit for the mounting bolts to attach the Fairing bracket on Roadglide models.

• The frame neck rake kit weld on piece adds 9 degrees on the 26″ and 30″ kit, 7 degrees on the 23″ kit.
(Total Factory Rake= 30 degrees)
• Factory Triple Tree rake is 4 degrees. Our trees are a +8 over stock for the 30″ kit for a total of 12 degrees, +5 degree over stock for the 26″ kit for a total of 9 degrees and a, +3 over stock on the 23″ kit for a total of 7 degrees.

• This kit can be installed with the motor in the frame

• Using this kit the neck is extended 2” forward and 2” up on both the 30″ and 26″ kit. (The 23″ kit extends 1″ forward and 1″ up.)

• The total resultant rake using our neck rake builders kit is 40 degrees for a 23″ wheel, 44 degrees for a 26″ wheel, and 48 degrees for a 30″ wheel.

• The resultant trail will provide proper handling at both low and hi speed.